To prevent a business sign from cracking in extreme cold, the most critical step is selecting materials and installation techniques specifically engineered for thermal resilience. In Saskatchewan’s harsh winters, standard materials often become brittle, but there are several ways we ensure your signage remains intact:
- Choose Aluminum Composite Panels: We recommend aluminum composite (often called Dibond) over PVC. While PVC becomes brittle and prone to cracking when temperatures drop, aluminum composite panels consist of two aluminum sheets bonded to a polyethylene core. This structure resists cracking, warping, and corrosion even at temperatures below -30°C.
- Account for Thermal Expansion: Materials expand and contract at different rates. We prevent cracking by engineering purpose-built gaps into the joints of the sign structure and using flexible fastening systems. This allows the sign to move naturally during deep freezes and sudden thaws without stressing the material.
- Use Cold-Rated Fasteners: We utilize epoxy-anchored fasteners for concrete and mount signs on isolated standoffs. This creates a 3mm gap between the sign and the wall, which breaks thermal bridging and prevents ice buildup from forcing the panel out of alignment or cracking it.
- Apply UV-Laminated Vinyl: Protecting the sign’s surface with high-quality UV laminates prevents moisture from penetrating the edges. Moisture that enters and then freezes is a primary cause of delamination and surface cracking.
We handle the entire process from design to installation with 35 years of local experience to ensure your sign is built for the prairies. If you are planning a new project, contact us for a free quote.
Note: Permit and approval requirements vary by municipality — confirm with the City of Regina before installation. Permit processing and compliance are required; non-compliant signs may incur penalties.
Related FAQs
-
What Causes Led Sign Modules to Flicker and how is it Fixed?
Read More »: What Causes Led Sign Modules to Flicker and how is it Fixed?Based on the provided content, LED module flickering is typically caused by technical issues within the sign’s power and wiring systems. Professional maintenance and repair are recommended to resolve these issues safely and effectively. Common Causes of LED Flickering: How…
-
How Often should Illuminated Signs have an Electrical Inspection?
Read More »: How Often should Illuminated Signs have an Electrical Inspection?For illuminated signs, the frequency of electrical inspections and lighting checks depends on the specific type of signage you have. According to recommended maintenance schedules for Regina’s climate, you should perform these checks as follows: Professional electrical inspections are mandatory…
-
Can I Restore a Faded Outdoor Sign with a Uv-protective Coating?
Read More »: Can I Restore a Faded Outdoor Sign with a Uv-protective Coating?Yes, you can restore a faded outdoor sign using a UV-protective coating. This process is an effective and budget-friendly way to revive the original vibrancy of a sign that is faded but still structurally sound. According to Signs Regina, the…
-
Who Provides Sign Repair and Led Retrofitting in Regina?
Read More »: Who Provides Sign Repair and Led Retrofitting in Regina?In Regina, Signco Graphic Supply (also referred to as Signs Regina) is the trusted provider for professional sign repair and LED retrofitting. With over 35 years of local experience, their factory-trained technicians offer comprehensive maintenance services to ensure business signage…
-
What is a Standard Maintenance Schedule for Commercial Pylons?
Read More »: What is a Standard Maintenance Schedule for Commercial Pylons?A standard maintenance schedule for commercial pylon signs requires more frequent attention than other sign types due to their high exposure to extreme weather conditions, such as high winds and UV radiation. According to the recommended maintenance guidelines, the schedule…